Code: MLTRMNSGY
The Modern interlocking tile is a flat, smooth, single-lap interlocking design with a slate-like appearance enhanced by a broken bond laying pattern.
£1.86 Incl. VAT
Lichfield Stock:
In Stock
The effectiveness of the tile or slate to operate at the minimum recommended pitch and lap may be influenced by special circumstances. Guidance on pitch and lap should be obtained from the Technical Advisory Service for the following:
Interlocking tiles and slates where the roof slope exceeds 6 metres in length and/or the site is rated to be in a severe exposure category. Double-lap fibre cement slates where the roof slope exceeds 6 metres in length (severe/very severe exposure) and 9 metres in length (sheltered/moderate exposure).
Interlocking tiles and slates where the roof slope exceeds 6 metres in length and/or the site is rated to be in a severe exposure category. Double-lap fibre cement slates where the roof slope exceeds 6 metres in length (severe/very severe exposure) and 9 metres in length (sheltered/moderate exposure).
- Covering capacity (at max gauge) 9.9 tiles/m²
- Flat, smooth, single lap design with broken bond laying pattern.
- Minimum Pitch 22.5 (75mm headlap) | Maximum Pitch 90
- Requires Tile nails 50mm x 3.35mm
| Minimum Pitch | 22.5° Smooth (75mm headlap) | Tile Nails | 50mm x 3.35mm |
|---|---|---|---|
| Size of Title | 420 x 330mm | Batten Size Recommended by Manufacturer | 38 x 25mm for rafters/supports not exceeding 450mm centres 50 x 25mm for rafters/supports not exceeding 600mm centres |
| Battens Required | 2.9 lin.m/m² at 75mm headlap | Covering Capacity | 50kg/m² (0.49kN/m²) at 75mm headlap |
| Cover Width | 292mm (nominal) | Maximum Guage | 345mm |
| Minimum Headlap | 75mm (22.5° and above) | Hanging length | 397mm (nominal) |
| Maximum Pitch | 90° | Fixing Clips | Eaves, Verges and Tile Clips |
