Code: BP0ST0603E5A
For absorbent Surfaces Prime with Acrylic Primer, diluted with 4 parts water - Application Thickness from 2-10mm - Walk On Hard From 2 Hours - Ready to receive ?oorcoverings (temperature dependent) 24 hours - Refer to Data Sheets for usage information - Self Smoothing Properties - The product complies with the standards set by GEV-EMICODE® EC1PLUS - Walk On Hard From 2 Hours - Water Mix
£15.30 Incl. VAT
Lichfield Stock:
In Stock
Setcrete Latex is a floor levelling compound for use in light to medium traffic internal areas prior to the installation of new floorcoverings. It is suitable for use over a wide range of absorbent subfloor types including sand/cement screed and concrete. It is also suitable for use over non-absorbent subfloors such as ceramics, granolithic, terrazzo, epoxy and polyurethane resins and quarry tiles, providing they are sound, well adhered and suitably prepared. Setcrete Latex is self-smoothing and can be applied at thicknesses between 2-10mm. It can be used with underfloor heating ans is an ideal choice for most internal floor levelling applications. Floors should be primed prior to using Setcrete Latex to ensure good adhesion between levelling compound and substrate and to give a higher quality finish, preventing pinholing and rapid drying of the levelling compound.
- For absorbent Surfaces Prime with Acrylic Primer, diluted with 4 parts water
- Application Thickness from 2-10mm
- Walk On Hard From 2 Hours
- Ready to receive Foorcoverings (temperature dependent) 24 hours
- Refer to Data Sheets for usage information
- Self Smoothing Properties
- The product complies with the standards set by GEV-EMICODE® EC1PLUS
- Walk On Hard From 2 Hours
- Water Mix
