Code: RNTWS500
Apply directly to damp surfaces - Dries in 2 hours - Stops freeze thaw damage - Use on brick, concrete and stone
£22.93 Incl. VAT
Lichfield Stock:
In Stock
Thompson's Water Seal is an advanced silicone micro emulsion that can be applied to either mortar, bricks, concrete or stone which is then absorbed by the material's surface to prevent water from penetrating the material. The long-lasting weather protection seal has been formulated with a unique water based combination of hydrophobic waxes and alykl polysiloxane resin.
To maintain water repellency, you will need to re-treat the area of application periodically. The frequency of re-treatment will vary depending on the exposure, type and nature of the treated material, as well as the weather conditions that they are exposed to. Thompson's Water Seal will cover approximately 4m² per litre; this is dependent on the porosity and texture of the surface you intend to treat. In normal conditions, Thompson's Water Seal will dry in two hours; like coverage, drying time is also dependent on the texture and type of surface you are treating.
| Viscosity | Low viscosity liquid. | Coverage | Thompson’s Water Seal will cover approximately 4 m² per litre. Coverage will vary depending on the texture and porosity of the surface to being treated. |
|---|---|---|---|
| Storage | Store in frost free conditions. To avoid risk of spillage always store and transport in a secure and upright position. | Flash Point | Above 60CC (Closed Cup) |
| Appearance | Slightly milky. | Odour | Low, inoffensive. |
| VOC Content | Minimal (0% - 0.29%) |
